Asterisk could not start with error message "asterisk died with code 1".
After the Electric Power from the electricity company is down and the building management switch it to Generator Power, and.... My PBX be "hang".
I have do the experiment : When the electric is normal, I Plug off the Power Cable from the PC, it is OK, my battery backup is working well, but when The Building Management switch the electric to Generator, Asterisk could not start with message : "asterisk died with code 1".
I think the quality of my backup battery is bad, I want to switch it to the good UPS. But actually I think the Trixbox should start smoothly, not with this problem : "asterisk died with code 1"
so you means that your asterisk pbx was power off by ups ( should be a monitor software that connect to ups), and when the power on again, your pbx will power on automaticly?
[quote:aba6b89e9b="miaolin"]so you means that your asterisk pbx was power off by ups ( should be a monitor software that connect to ups), and when the power on again, your pbx will power on automaticly?[/quote]
No..no... When I shutdown the Trixbox server for 10 minutes or electricity be off, then Asterisk can not start and this message will appear "Asterisk died with code 1".
sometimes blue screen is appear with "kudzu" windows. Kudzu tells : "Tigerjet XXX has been remove......" and I must choose "remove configuration" then setting the IP again for A400P cards. Why this is happen ? Is this the weakness of Trixbox or A400P ?
The Trixbox must "ON" 24 hours, but when Trixbox server is shutting down then "Asterisk died with code 1" message is appear or... kudzu windows will appear.
----Welcome to Kudzu, Red Hat Linux Hardware detection & configuration tool--
The following modem has been removed from your system : Tiger Jet 3XX modem/ISDN interface
The next page :
Hardware discovery utility 1.1.95.15 (c) 2003 Red Hat, Inc
Hardware Removed
Remove Configuration
Keep Configuration
Do Nothing
How do I solve this problem ? Will Trixbox-OpenVox Software solve this problem ?